Wide Lightning 29 15mm, 12x142mm 32h
Varenummer: AC-WWL02-GSD-64-16
.
DKK 5.999,00 / None
DKK 4.799,20 ekskl. moms
Ultimative køreegnskaber - ekstra bredde - ekstra stærke - ekstra gode RIM WIDTH 32mm


Mere information
  • Specs

    DISCIPLINE MTB Cross Country | Enduro
    RIMS MTB Wide Lightning Tubeless Aluminum Disc Rims 29”
    SPOKES AC 14/15 gauge Spokes Black | AC Aluminum Spoke Nipples Silver | 32h 3-Cross Front and Rear
    WEIGHT FRONT 727g | REAR 842g |PAIR 1569g
    HUBS/SPACING FRONT Disc 130 100mm | 15mm Thru Axle Disc 100mm | 9mm Thru Axle Disc 100mm REAR Disc 225 135mm | 10mm x 135mm Thru Axle Disc | 12mm x 142mm Thru Axle Disc REAR SPLINE Shimano/SRAM 9/10/11 or Sram XDBRAKE INTERFACE 6 Bolt International Standard
    LOOK/COLOR AC Black Rims with Gray HubsINCLUDED AC Tubeless Tape Installed | AC Tubeless Valves
    QUICK RELEASE Cromoly QR's
    UPGRADES Ceramic Bearings | Wheel Bag 
    *Can be ridden with regular tire and tube
    WHY MTB TUBELESS?
    THE NUMBER ONE REASON TO RUN TUBELESS WHEELS IS TO AVOID FLAT TIRES.
    Our mountain bikers have been successfully riding and racing AC tubeless wheels for the last few years. Bill Shook is taking tubeless rim technology to the next level. Our tubeless wheels are set up with two AC honey colored tape layers to cover the spoke holes. Next, install tubeless ready clincher tires and pump liquid sealant into the system through our proven AC valves. The liquid sealant replaces the conventional tube. You may ask how our tubeless system works. Bill Shook designed the rim with a bead barb running along the edge of the bead shelf. When installed, the tire firmly pops into position over the bead barb. The tire bead centers and tightly grips the circumference of the rim creating a sealed environment to hold the liquid sealant without burping. The number one reason to run tubeless wheels is to avoid flat tires. The sealant quickly fills and closes small holes in the tire preventing flats caused by rocks, thorns and other trail debris. Pinch flats can not occur because a tube is not needed. Our tubeless system is about speed. It lowers wheel weight at the extreme outer edge of the rim resulting in lower rolling resistance. In a traditional clincher set up, the tire and tube interface moves as the wheel rolls, creating friction and energy loss. With the AC tubeless set up, there is no frictional energy loss between the tire and tube because the tube is gone. Liquid sealant is lighter than a tube. You can ride lighter weight tires with our tubeless system because you don’t have to use tires made with heavy, inflexible puncture layers. Overall, our tubeless system is lighter and the wheel will spin up faster with less rider energy output. And the best part is flat tires are past history.
)